Air Filter Maintenance
|
13 Reinstall your filter. Clamp-on filter: Make sure both the mounting flange on your filter and ATV are clean before installation. Don't apply grease to clamp-on style filters. Also, don't overtighten the clamp, especially if your ATV has a plastic flange on the airbox. Overtightening can warp or break the flange, causing a catastrophic air leak. Press-on filters: Make sure the seals on the filter and the airbox are clean and apply a moderate coat of waterproof grease. This is very important and helps to keep dirt from seeping through the seal. View Related Article
|
|
|
|