ATV Rider Magazine Forums

Join the ATV Forum at ATV Rider to discuss ATVs, ATV riding and racing, latest news from our ATV forums, ATV accessories, all terrain vehicle shows & events, discussion forum and more.ATV Rider Magazine Forumshttp://forums.atvrideronline.comThu, 24 Jul 2008 05:07:34 -0700<![CDATA[2000 Honda 400 EX maintenance]]>2000 Honda 400 EX maintenance
needing to do routine maintenance. just change the oil and filter, adjusted chain and lubed it. also cleaned air filter and tire pressure. I was wondering on what the best way to clean the carb was. any tips please help.

]]>http://forums.atvrideronline.com/70/6882352/atv_repair_maintenance/2000_honda_400_ex_maintenance/index.htmlhttp://forums.atvrideronline.com/70/6882352/atv_repair_maintenance/2000_honda_400_ex_maintenanceWed, 23 Jul 2008 15:07:53 -0700<![CDATA[taotao 250d ATV or Vbike 250-V4D upgrade suggestions?]]>taotao 250d ATV or Vbike 250-V4D upgrade suggestions?
I'm planning on getting a taotao 250d ATV or Vbike 250-V4D and after reading many post I'm thinking the following should be done to the V4D / 250D when I first get it. but have a few questions? Any help is greatly appreciated. 1. Use premium gas 2. Change out the spark plug to a (NGK) NGK D8EA (cost: $4) do I need to adjust the gap? .02 - 025? ? is their another brand that is better and what model number? 3. Change the oil and use a synthetic oil (cost: $20) ? any suggestions on the best brand? 4. locktight all nuts (cost $15) are their any problems doing this? should I use a torque wrench on the nuts and if so at what torque? 5. New Chain (428H KMC with 3/4 inch max play) (cost: $15) ? I noticed the max *** is 150 for this chain. Since this will be a 250 CC , do I need to consider a different chain? 118 or 120 link? The 520H chain is for a 400cc max ATV so is this a better choice and will it work? ? what is the best chain to consider brand and model? 6. Change the front sprocket to a 13 or 14 tooth (13 tooth front JTF259 sprocket) (cost: $10) a. should you also change out the rear sproket at the same time to ensure a quality sprocket? or is this not needed? Is this a simple replacement? would it help reduce chance of chain comming off? b. if the bolts touch the chain with the 13 tooth, doesn't this cause problems later on? should I go with a 14 tooth instead or is the 14 tooth too little of a change from the current 15 tooth that comes with the ATV. c. also is a chain tensioner recommended and if so what brandand model. 7. Any other suggestions I missed? Do I need a back up battery (if so what brand and model) When I need to replace the tires will any 8" brand tire work? Can you change them out to 10" tires or does this cause other problems? anyone know of a good swing arm bushing that will fit? should I get a set of nuts to keep on hand incase I loose one out on the trail? I know this sounds like a little bit of work but I'm hopeing to to be able to do about $100 in upgrades and have a pretty good reliable ATV. Thanks

]]>http://forums.atvrideronline.com/70/6887393/newbies/taotao_250d_atv_or_vbike_250_v4d_upgrade_suggestions/index.htmlhttp://forums.atvrideronline.com/70/6887393/newbies/taotao_250d_atv_or_vbike_250_v4d_upgrade_suggestionsWed, 23 Jul 2008 15:07:05 -0700<![CDATA[Vbike 250-V4d / TaoTao 250D upgrade suggestions (chinese off brand ATV]]>Vbike 250-V4d / TaoTao 250D upgrade suggestions (chinese off brand ATV
I'm planning on getting a taotao 250d ATV or Vbike 250-V4D and after reading many post I'm thinking the following should be done to the V4D / 250D when I first get it. but have a few questions? Any help is greatly appreciated. 1. Use premium gas 2. Change out the spark plug to a (NGK) NGK D8EA (cost: $4) do I need to adjust the gap? .02 - 025? ? is their another brand that is better and what model number? 3. Change the oil and use a synthetic oil (cost: $20) ? any suggestions on the best brand? 4. locktight all nuts (cost $15) are their any problems doing this? should I use a torque wrench on the nuts and if so at what torque? 5. New Chain (428H KMC with 3/4 inch max play) (cost: $15) ? I noticed the max *** is 150 for this chain. Since this will be a 250 CC , do I need to consider a different chain? 118 or 120 link? The 520H chain is for a 400cc max ATV so is this a better choice and will it work? ? what is the best chain to consider brand and model? 6. Change the front sprocket to a 13 or 14 tooth (13 tooth front JTF259 sprocket) (cost: $10) a. should you also change out the rear sproket at the same time to ensure a quality sprocket? or is this not needed? Is this a simple replacement? would it help reduce chance of chain comming off? b. if the bolts touch the chain with the 13 tooth, doesn't this cause problems later on? should I go with a 14 tooth instead or is the 14 tooth too little of a change from the current 15 tooth that comes with the ATV. c. also is a chain tensioner recommended and if so what brandand model. 7. Any other suggestions I missed? Do I need a back up battery (if so what brand and model) When I need to replace the tires will any 8" brand tire work? Can you change them out to 10" tires or does this cause other problems? anyone know of a good swing arm bushing that will fit? should I get a set of nuts to keep on hand incase I loose one out on the trail? I know this sounds like a little bit of work but I'm hopeing to to be able to do about $100 in upgrades and have a pretty good reliable ATV. Thanks

]]>http://forums.atvrideronline.com/70/6887294/other_sport_atvs/vbike_250_v4d_taotao_250d_upgrade_suggestions_chinese_off_brand_atv/index.htmlhttp://forums.atvrideronline.com/70/6887294/other_sport_atvs/vbike_250_v4d_taotao_250d_upgrade_suggestions_chinese_off_brand_atvWed, 23 Jul 2008 00:07:36 -0700<![CDATA[2006 LTZ 400 HELP]]>2006 LTZ 400 HELP
Hey, just bought a LTZ 400. It's a 2006 and has low hours! My buddies from work keep telling me that it is going to blow up! I think that they are just being pest but i don't know! Is there a large chance of my bike blowing up? And what are some things to keep it from blowing? Help would be greatly appreciated!!!! P.S. Any tips on my bike would be great! Even if they have nothing to do with blowing up!

]]>http://forums.atvrideronline.com/70/6920262/suzuki_atv/2006_ltz_400_help/index.htmlhttp://forums.atvrideronline.com/70/6920262/suzuki_atv/2006_ltz_400_helpTue, 22 Jul 2008 22:07:30 -0700<![CDATA[2004 Polaris Sportsman Lug bolt change Question...]]>2004 Polaris Sportsman Lug bolt change Question...
I've got an 2004.5 Sportsman 600 that came stock with metal rims. I bought a set of new take-off aluminum rims from an '07 Sportsman. They line up perfectly but the lugs are a bit short. I can only get about one and a half turns with the new lug nuts. So, I ordered the longer lug nuts for these aluminum rims but what I want to find out is that how difficult is it to change out these lug nuts? What do I have to take apart in order to replace these? Any input would be appreciated. Thanks..........Robb

]]>http://forums.atvrideronline.com/70/6920178/polaris_atv/2004_polaris_sportsman_lug_bolt_change_question/index.htmlhttp://forums.atvrideronline.com/70/6920178/polaris_atv/2004_polaris_sportsman_lug_bolt_change_questionTue, 22 Jul 2008 19:07:55 -0700<![CDATA[Honda 200 rear brake drum removal]]>Honda 200 rear brake drum removal
I need info on how to remove the brake drum from my 85 Honda 200 atv. I can get the wheel, hub assembly and sealed drum enclosure off but I can't seem to remove the drum itself. I am assuming it should slide off but that is as far as I can get. Any help is appreciated. Thanks

]]>http://forums.atvrideronline.com/70/6878362/atv_repair_maintenance/honda_200_rear_brake_drum_removal/index.htmlhttp://forums.atvrideronline.com/70/6878362/atv_repair_maintenance/honda_200_rear_brake_drum_removalTue, 22 Jul 2008 18:07:22 -0700<![CDATA[02 LT400F Eiger]]>02 LT400F Eiger
New to this so I hope someone can help me out. I have no spark ehen trying to start my Quad, I had ciol checked at dealer and they said it was good. With the key on if I remove a wire from coil and put back on it snaps and the plug sparks. I do not know how to check the ststor and also wonder if the rectifier is bad and how do you check that. Any help will be greatly apprecitated. Hate to say it but I am at a Library and time is almost done but if you can help my e-mail is maximumlite@hotmail.com I will check this forum tomarrow so thanks to anyone who can help. Thanks Dave

]]>http://forums.atvrideronline.com/70/6884945/suzuki_atv/02_lt400f_eiger/index.htmlhttp://forums.atvrideronline.com/70/6884945/suzuki_atv/02_lt400f_eigerTue, 22 Jul 2008 04:07:54 -0700<![CDATA[87' 350 Clutch Problems]]>87' 350 Clutch Problems
Im in the process of rebuilding an 87' 350 Warrior and I ran into a problem. I noticed that no matter what gear I put it in, the gear never enganged. At first I assumed the worst and thought the transmission went out. But I got to lookin at it and the clutch plates had about a 1/4" of play in the plates. I need to know what the thickness of the clutch plates is supposed to be brand new. Pat

]]>http://forums.atvrideronline.com/70/6883955/yamaha_atv/87_350_clutch_problems/index.htmlhttp://forums.atvrideronline.com/70/6883955/yamaha_atv/87_350_clutch_problemsTue, 22 Jul 2008 01:07:00 -0700<![CDATA[TAOTAO TTA110 ATV W/remote ALL GURUS / TTA110 OWNERS]]>TAOTAO TTA110 ATV W/remote ALL GURUS / TTA110 OWNERS
ALL GURUS / TTA110 OWNERS I was given a 2007 110cc Chinese TAOTAO, Army Camo color. Situation: Originally wouldnt start after being submerged in water and mud, buddies son ran it into the creek. I myself am partial electrician but don't deal to much with ATV's, should be pretty easy since their isn't any real wiring, however i gutted everything pulled the engine, cleaned magneto and coils, CDI, Rectifier, Starter, Carbeurator, everything has been pulled and examined for damage even remote control box; ran continuity checks;good to go; but to my dismay i failed to remember to take pictures or do a diagram first of the wiring harness. The only diagrams i can find on the net so far totally do not match the color coding for the wires, and all plugs are generic with exact same male and female connections minus the engine and coil harness. QUESTION: where can i get a wiring diagram for this monster, all i have is the certificate of origin (registration) model is TTA110 2007 4.7HP ZHE JIANG TAOTAO Industry *** LTD.; IF IT IS POSSIBLE CAN WE GET AN OWNER OF A TTA110 TO POST PICS OF THEIR TAO TAO WITH CONNECTIONS UP CLOSE for visual reference. Thanks Very Much. Robert

]]>http://forums.atvrideronline.com/70/6876430/atv_repair_maintenance/taotao_tta110_atv_w_remote_all_gurus_tta110_owners/index.htmlhttp://forums.atvrideronline.com/70/6876430/atv_repair_maintenance/taotao_tta110_atv_w_remote_all_gurus_tta110_ownersTue, 22 Jul 2008 00:07:04 -0700<![CDATA[Front brakes pads-'07 Grizzly]]>Front brakes pads-'07 Grizzly
Is it normal for the front brake pads on an '07 Grizzly to be completely worn out after just 350 miles? I mainly use back brakes or none at all with the nice engine braking on the Grizzly. I would say that I ride it mildly, nothing out of the ordinary. Anyone have any suggestions, or do I need a spare set of brake pads next my spare oil filter and oil.

]]>http://forums.atvrideronline.com/70/6882956/yamaha_atv/front_brakes_pads_07_grizzly/index.htmlhttp://forums.atvrideronline.com/70/6882956/yamaha_atv/front_brakes_pads_07_grizzlyMon, 21 Jul 2008 22:07:57 -0700<![CDATA[1992 yamaha blaster clutch slippin bad]]>1992 yamaha blaster clutch slippin bad
i got a new barrnet dirt digger clutch had it put in it is slippin realy bad as soon as the clutch gets disengaged any ideas how i can fix this

]]>http://forums.atvrideronline.com/70/6918042/yamaha_atv/1992_yamaha_blaster_clutch_slippin_bad/index.htmlhttp://forums.atvrideronline.com/70/6918042/yamaha_atv/1992_yamaha_blaster_clutch_slippin_badMon, 21 Jul 2008 22:07:56 -0700<![CDATA[2006 hawkeye crank no start]]>2006 hawkeye crank no start
i have a 06 2wd hawkeye. the engine cranks and will not start. the spark plug is dry like it is not getting fuel. fuel filter is clear and fuel flows to carburetor with inlet line removed. it will start on starting fluid. prior to all of this there was oil in air filter box. any help is appreciated.

]]>http://forums.atvrideronline.com/70/6875851/polaris_atv/2006_hawkeye_crank_no_start/index.htmlhttp://forums.atvrideronline.com/70/6875851/polaris_atv/2006_hawkeye_crank_no_startMon, 21 Jul 2008 21:07:32 -0700<![CDATA[chinese atv swing arm bushings where to get??`]]>chinese atv swing arm bushings where to get??`
I have 2 chinese atv's. Both tau tau model atv's. One is a ata-150a and the other a ata250D. Both have the same swing arm bushings. What I want to know is, are there any aftermarket swing arm bushings I can use on these. I can only find the whole swing arm's but not the bushings seperately. I thought about looking for polyurethane bushings sold by size. any insight will be helpful. Thanks

]]>http://forums.atvrideronline.com/70/6917844/newbies/chinese_atv_swing_arm_bushings_where_to_get/index.htmlhttp://forums.atvrideronline.com/70/6917844/newbies/chinese_atv_swing_arm_bushings_where_to_getMon, 21 Jul 2008 14:07:00 -0700<![CDATA[04 yfz450 oil not getting back to the reservoir]]>04 yfz450 oil not getting back to the reservoir
I like to say thanks first. I'm new and read a lot of stuff on this site and it helped. I have a 04 yfz 450 that I just finished putting back together. the rod went out and I had to replace everything even the case. it has a hot rod stroker crank, Athena big bore kit 98mm piston , port & polished head , kibble white valves & Curtis sparks full exhaust. fires right up and idles fine run good. so I took it down the road got back let it cool down and there is no oil left in the reservoir it is all in the crank case. the crank case is full of oil if you open the timing mark spot oil starts coming out of it. I have taken the screen out of the bottom of the reservoir and cleaned it already no luck there either. any help please

]]>http://forums.atvrideronline.com/70/6916380/atv_repair_maintenance/04_yfz450_oil_not_getting_back_to_the_reservoir/index.htmlhttp://forums.atvrideronline.com/70/6916380/atv_repair_maintenance/04_yfz450_oil_not_getting_back_to_the_reservoirMon, 21 Jul 2008 11:07:54 -0700<![CDATA[2004 Honda Foreman Backfiring?]]>2004 Honda Foreman Backfiring?
I am a part time shade tree atv mechanic but I do a little work on the side . Minor stuff like preventative maintenance like oil changing, brakes, minor electrical I can do ok at but right now I have a 04 honda foreman the owner says back fires pretty often. I have ridden aroud a little and it has done it 2 or 3 times on me. its always while decelerating. I have spoken to several other people who own these and they say they have the same problem. Is this just a characteristic of this particular machine? If anyone can help it would be greatly appreciated.

]]>http://forums.atvrideronline.com/70/6881294/atv_repair_maintenance/2004_honda_foreman_backfiring/index.htmlhttp://forums.atvrideronline.com/70/6881294/atv_repair_maintenance/2004_honda_foreman_backfiringMon, 21 Jul 2008 00:07:26 -0700<![CDATA[1988 LT250 Won't Start]]>1988 LT250 Won't Start
Got an 88 in good shape. Bike is hard to start and most times won't start. The starter is shot so I use the pull start. There are 2 choke levers = a lever on the handlebar and a pull out knob on the carb body. How do these work together?

]]>http://forums.atvrideronline.com/70/6915699/suzuki_atv/1988_lt250_wont_start/index.htmlhttp://forums.atvrideronline.com/70/6915699/suzuki_atv/1988_lt250_wont_startSun, 20 Jul 2008 22:07:48 -0700<![CDATA[2004 YFZ 450 TROUBLE]]>2004 YFZ 450 TROUBLE
HEY GOOD EVENING...I have a 2004 YFZ 450 I just purchased recently, I got one or 2 rides out of it and it just stalls out, as if it is not geting gas or air ? I am new to working on these bikes and I am trying to find the issue any ideas? what could be the issue. thanks ...for any help given Tony

]]>http://forums.atvrideronline.com/70/6880268/atv_riding/2004_yfz_450_trouble/index.htmlhttp://forums.atvrideronline.com/70/6880268/atv_riding/2004_yfz_450_troubleSun, 20 Jul 2008 18:07:18 -0700<![CDATA[110cc chinese quad, NO SPARK]]>110cc chinese quad, NO SPARK
I have just bought a 110cc quad from an auction and found when i got home that there is no spark,It is a chinese quad,the make is a BEST with a Kawasati engine. I would be most grateful for any help, as it is for my son. THANK YOU

]]>http://forums.atvrideronline.com/70/6879920/atv_repair_maintenance/110cc_chinese_quad_no_spark/index.htmlhttp://forums.atvrideronline.com/70/6879920/atv_repair_maintenance/110cc_chinese_quad_no_sparkSun, 20 Jul 2008 16:07:44 -0700<![CDATA[Blowing 10 amp ignition fuse...]]>Blowing 10 amp ignition fuse...
My 01 Rancher ES is immediately blowing the 10 amp fuse when I turn on the ignition key. When I unplug the rear control unit, it does not blow the fuse. I have unplugged the lights, engine kill switch and carb heater it still blows the fuse. I put a lead from my meter on the space where the ignition wire comes into control unit plug and touch the other lead to the frame and it reads "0". I have looked at the wiring harness and cannot find a short. Any suggestions? While the control unit is uplugged everything else works fine....what gives? Thanks..Solohunter

]]>http://forums.atvrideronline.com/70/6872572/honda_atv/blowing_10_amp_ignition_fuse/index.htmlhttp://forums.atvrideronline.com/70/6872572/honda_atv/blowing_10_amp_ignition_fuseSun, 20 Jul 2008 01:07:31 -0700<![CDATA[need help!!!!]]>need help!!!!
i have a 07 kingquad 700. the problem im having is, when i start it up it idles fine for a minute then dies or if i put it in gear it dies. there is oil coming out of a small hose in the rear of it behind the brake light, almost like a vent tube... if i get it to go in gear it runs great its not sluggish, it just wont idle or if i slow down real almost to a stop it dies... im clueless can anyone give me help thanks!!!!!

]]>http://forums.atvrideronline.com/70/6878330/suzuki_atv/need_help/index.htmlhttp://forums.atvrideronline.com/70/6878330/suzuki_atv/need_helpSat, 19 Jul 2008 23:07:14 -0700<![CDATA[Bruin blowing fuse]]>Bruin blowing fuse
Hello riders My 2005 Bruin 350 4X4 is blowing the 30A fuse when the key is turned on at what I asume is the starter solinoid/30A fuse block good continuity from ignition key switch to solinoid, 12.5 volts at fuse. Asuming bad solinoid? Any sugestions? Thanks

]]>http://forums.atvrideronline.com/70/6878174/yamaha_atv/bruin_blowing_fuse/index.htmlhttp://forums.atvrideronline.com/70/6878174/yamaha_atv/bruin_blowing_fuseSat, 19 Jul 2008 21:07:51 -0700<![CDATA[2004 Rancher wont shift]]>2004 Rancher wont shift
I have a 2004 Honda Rancher that I cant get to shift into esp or auto. I have checked the switch and that does not seem to be it. Thanks for any help.

]]>http://forums.atvrideronline.com/70/6870958/atv_repair_maintenance/2004_rancher_wont_shift/index.htmlhttp://forums.atvrideronline.com/70/6870958/atv_repair_maintenance/2004_rancher_wont_shiftSat, 19 Jul 2008 18:07:27 -0700<![CDATA[2- three wheelers]]>2- three wheelers
looking to trade for an auto 4 wheeler both run great need nothing. looking for a scrambler trailblazer ect.. 812-381-3261 located in indiana 47424 email me for pics jmp_79@yahoo.com

]]>http://forums.atvrideronline.com/70/6870283/honda_atv/2_three_wheelers/index.htmlhttp://forums.atvrideronline.com/70/6870283/honda_atv/2_three_wheelersSat, 19 Jul 2008 15:07:25 -0700<![CDATA[Help Polaris Outlaw 90]]>Help Polaris Outlaw 90
I have two Polaris Outlaw 90s One starts fine, The other I jump and starts up fine but the instant I pull the jumper cables the fourwheeler dies. I swap the batteries same thing so it is not a battery issue. (plus I purchased two new batteries) Almost like a short in the system. The Starter only works when jump starting. not sure what it could be. Thanks for any help in advanced. BTW recommendation never buy polaris again replaced four rear-ends in these things took it too a race mechanic and he told me the tubing is junk that they use. He welded pieces on the breakpoints hoping it would fix it. Alos dealer admitted he has replaced everyrear end in all of these machines he has sold

]]>http://forums.atvrideronline.com/70/6877301/atv_repair_maintenance/help_polaris_outlaw_90/index.htmlhttp://forums.atvrideronline.com/70/6877301/atv_repair_maintenance/help_polaris_outlaw_90Sat, 19 Jul 2008 12:07:20 -0700<![CDATA[2001 scrambler i need a headlight..]]>2001 scrambler i need a headlight..
anyone??

]]>http://forums.atvrideronline.com/70/6913242/atv_parts_accessories/2001_scrambler_i_need_a_headlight/index.htmlhttp://forums.atvrideronline.com/70/6913242/atv_parts_accessories/2001_scrambler_i_need_a_headlight