New Six-Spoke Cast Aluminum Wheels
- New six-spoke cast aluminum wheels replace the old plain steel units and make a significant styling contribution while offering a more premium image
- SE version features a bright silver machined surface finish on the wheel faces
- Mounted with aggressive AT 25 x 8-12 (front) and AT 25 x 10-12 (rear) tires, the premium wheels help give the Brute Force its 9.4 inches of ground clearance
New Wide and Rugged Styling
- High-gloss, scratch-resistant Thermoplastic Olefin (TPO) bodywork offers a tough, scratch resistant surface to help it stay fresh looking for the long haul
- New bodywork (hood, bumper and headlight surrounds) are key elements of the Brute Force 750's new wide and rugged design
- SE model features a durable, premium quality Metallic Tungsten Gray automotive paint finish with a unique graphics package
- New covered hood storage bin offers additional convenience and is large enough to hold two 16 oz. bottles
- New front and rear fenders complement the tougher-looking design
- Waterproof storage box in the left front fender complements the easy-access storage pocket on the right side
- New dual wide-set 35-watt headlights help provide excellent lighting for nighttime rides
- New taillight design compliments the new wide-stance bodywork
- New cargo racks feature stronger 25.4mm tubing that is over 25% larger in diameter than the previous versions. This enhances durability and helps contribute to the machine's new tougher styling. Total combined rack capacity is 264 Lbs
- The addition of tie-down hook points on the cargo rack tubes make it easier -and far more reliable- to secure a load
- Revised exhaust covers and the addition of heat-resistant padding on the inside of the side covers significantly reduce engine heat transmitted to the rider, contributing to enhanced rider comfort
- Revised deflectors and inner bodywork provide greater overlap between the airbox intake tube and snorkel extension, making it even more difficult for water and/or mud to get into the air cleaner
- New protective shielding under the front hood helps prevent mud from reaching the air intake, and also helps protect the relocated electrical equipment from the elements
- Larger wheel-well flaps help minimize water/mud intrusion into the engine compartment
Independent Double Wishbone Front Suspension
- Revised double wishbone independent front suspension design includes preload adjustable shocks, and features 6.7 inches of suspension travel for a comfortable ride
- Front upper and lower wishbone pivot joints use rubber bushings to minimize maintenance requirements
- Optimized suspension geometry provides light steering
- Revised suspension arm/shock absorber layout (shock absorbers are mounted at a more splayed angle between the upper and lower wishbones) helps minimize sag and allows a higher ground clearance to be maintained once a rider sits on the ATV
- With the revised geometry, single-rate springs were found to offer the best performance
Independent Rear Suspension
- Double A-arms and a preload adjustable shock at each wheel provide superior ride comfort and ground following ability
- Independent rear suspension provides 7.5 inches of travel
- Re-tuned shock settings minimize sag and enable a higher ground clearance to be maintained once a rider sits on the ATV
- Lower rear A-arms feature a combination of needle bearings and ball joints for smooth suspension action, stability and excellent rider comfort
- Upgraded rear stabilizer rods use thicker-walled tubing for increased lateral stability
- Torsion bar helps minimize body roll
Braking
- Dual front disc brakes with two-piston calipers and Kawasaki's sealed, oil-bathed, multi-disc rear brake system provide maximum stopping power
- Electronically controlled Kawasaki Engine Brake Control helps to slow the ATV under certain conditions
Relaxed Cockpit
- New instrumentation is easier to read at a glance and features a multi-purpose digital display with speedometer, odometer, tripmeter, fuel gauge, engine temp, clock, hour meter and indicator lamps for EPS, neutral, reverse, 2WD/4WD, belt and oil warnings
- New sport style grips help reduce felt vibration and enhance rider control, as well as offering molded-in safety wire grooves
- Comfortable, upright seating position combines with the independent rear suspension for a plush ride
- New seat material has superb elasticity, offering increased comfort and holding performance. The material is also resistant to cold, allowing it to maintain its suppleness when temperatures drop and reducing the chance of tearing/ripping when exposed to extremely cold environments
Additional Features
- 12-volt electric outlet offers convenient power for accessories
- Aluminum footpegs help minimize weight
- Trailer hitch bracket with 1,250-pound towing capacity is standard equipment